Major 10,000 KM Service

What Does a Major 10,000 KM Service Include?

Engine Oil and Oil Filter Replacement

Fresh engine oil is the foundation of every service. Old oil breaks down under heat, loses its viscosity, and stops protecting engine components effectively. At 10,000 KM, the oil is fully due for replacement along with the oil filter, which traps metal particles and contaminants. Using the correct grade of oil for your engine and the UAE climate is essential — not all oils perform equally at 45°C+.

Air Filter Inspection and Replacement

Ajman’s roads generate significant airborne dust and fine sand. The engine air filter traps this debris before it enters the combustion chamber. A clogged air filter reduces engine performance, increases fuel consumption, and in severe cases allows abrasive particles into the engine. At the 10,000 KM service, the filter is inspected and replaced if needed.

Cabin Air Filter Replacement

The cabin filter keeps the air inside your car clean by filtering dust, pollen, and pollutants before they reach the AC vents. In the UAE, this filter clogs faster than almost anywhere else due to the level of airborne dust. A blocked cabin filter reduces AC efficiency — something no driver in Ajman wants during summer.

Brake Inspection

Brakes are safety-critical and non-negotiable. The major service includes a full inspection of brake pads, brake discs, brake fluid level, and brake lines. UAE driving — particularly in Ajman’s heavy traffic with constant acceleration and braking — wears brake pads faster than highway driving. Catching thin pads early prevents rotor damage and saves money.

Tyre Inspection and Rotation

All four tyres are inspected for tread depth, uneven wear, sidewall damage, and correct inflation. Tyre rotation — moving front tyres to the rear and vice versa — ensures even wear across all four tyres and extends their overall life. Correct tyre pressure is also critical for fuel economy and safe handling on UAE motorways.

Battery Check

Extreme heat is the number one killer of car batteries in the UAE. High temperatures cause battery fluid to evaporate and internal components to degrade faster. At the major service, the battery’s voltage, cold cranking amps, and overall health are tested. Identifying a weakening battery before it fails prevents the frustration of being stranded.

Cooling System Check

The engine cooling system — radiator, coolant level, hoses, thermostat, and water pump — works extremely hard in UAE temperatures. Coolant degrades over time and loses its ability to prevent overheating and corrosion. The major service checks all cooling components and coolant conditions to ensure your engine stays within safe operating temperatures.

Fluid Top-Ups and Inspection

All vehicle fluids are checked and topped up as needed. This includes:

• Transmission fluid — ensures smooth gear changes
• Power steering fluid — keeps steering light and responsive
• Brake fluid — critical for brake performance and safety
• Windshield washer fluid — essential for visibility in dusty conditions

Belts and Hoses Inspection

The drive belt (serpentine belt) powers the alternator, AC compressor, and power steering pump. A snapped belt leaves you stranded immediately. Rubber hoses in the cooling and fuel systems crack and harden with age, especially in UAE heat. Both are inspected carefully at the major service.

Suspension and Steering Check

The suspension system — shock absorbers, struts, ball joints, tie rods, and bushings — takes a beating on Ajman’s roads, particularly from speed bumps. A full inspection checks for worn components, unusual play, and fluid leaks from shock absorbers. Worn suspension affects handling, tyre wear, and ride comfort.

Lights and Electrical Systems Check

All lights are checked — headlights, indicators, brake lights, reverse lights, and interior lighting. Electrical connections are inspected for corrosion. A non-functioning brake light or indicator is not just an inconvenience — it is a traffic violation in the UAE.

OBD2 Diagnostic Scan

Modern vehicles store fault codes in their onboard computer even when no warning light is visible. An OBD2 diagnostic scan reads these hidden codes and reveals pending issues in the engine, transmission, ABS, and other systems. This scan is one of the most valuable parts of a major service — it surfaces problems you cannot see or feel yet.

Exhaust System Inspection

The exhaust is checked for leaks, rust, and damage. An exhaust leak affects engine performance, increases cabin fumes, and raises emissions. In the UAE, where vehicles must pass RTA roadworthiness tests, a damaged exhaust is a failure point.

Underbody and Chassis Inspection

With the vehicle raised on a lift, the technician inspects the underbody for rust, damage, fluid leaks, and worn components. This is where CV boots, brake lines, fuel lines, and exhaust hangers are all visible and easy to check.

What Happens If You Skip the Major Service?

Skipping the major 10,000 KM service doesn’t make problems disappear — it makes them invisible until they become serious.

Degraded oil circulates through the engine, increasing wear on pistons, bearings, and camshafts. A clogged air filter robs engine power and increases fuel consumption. Thin brake pads grind into the rotors, turning a pad replacement into a pad-and-rotor replacement. A weak battery that could have been identified in a service fails on the road at the worst possible time.

The cost of a major service is always less than the cost of the repairs it prevents. In the UAE, where heat and dust accelerate every form of wear, this equation is even more stark.

Why Choose Marwat Garage for Your Major 10,000 KM Service?

At Marwat Garage, we cover every item on the major service checklist — no shortcuts, no skipped steps. Our technicians use proper diagnostic equipment, quality parts, and manufacturer-recommended fluids. You get a clear breakdown of what was done, what was replaced, and what needs attention at the next visit. No vague explanations, no surprise charges.